1.Lack of phase, error phase protection:

If lack of phase (moving-walk) will or eror phase has been checked out, the escalator automatically stop the operation.

2.MOtor over-IOaU protection:

When the current exceeds 15% of the current rating, the escalator will automatically slop the operation.

3.Electrical appliance loop protection:

It offers the automatic circuit disconnecting device to protect the circuit and mains components of the escalator (moving-walk).

4.Handrail inlet protection:

When some foreign substance has been clipped in the handrail inlet. the  escalator (moving-walk) will automatically slop the operation.

5.Comb plate safety device:

When some foreign substance has been clipped in or between the combs.the escalator (moving-walk) will automatically stop the operation.

6.Step sagging protection device:

When there is abnormal step bending, the escalator (moving-walk) will stop the operation before the step entering into the comb plate.

7.Broken Drive-chain safety Device:

When the drive-chain has been over-stretched or it is broken, the escalator (moving-walk) will automatically stop the operation.

8.Broken step chain protection:

When the step (plate) chain has been over-stretched or it is broken, the escalator (moving walk) will automatically slop the operation.

9.OVer-speed protection:

When  there  is over-speed to the escalator (moving  walk),it will automatically stop the operation.

10.Direction reversal protection:

When it comes the unintentional reve  rsal of the direction of travel, the escalator (moving walk) will automatically stop the operation.

11.Security line:

The yellow synthetic resin security line is located in the front position and two sides of the escalator tread so that the passengers will not tread in-between the edge of the adjacent step and the ti什group lengthened skirt panel.  The security line on both sides of the step is higher than the tread surface.   (The  moving-walk  offers the  selective  yellow spray-palmed security line.)